SCIENERGY’s X-ray sensor system is the world’s first epoch-making product that uses soft X technology.
The soft X-ray technology makes it possible to handle various film materials, enabling automation of inspection processes that were difficult to realize until now.
In addition, it can be retrofitted into existing packaging machines and can be installed at a lower cost than conventional machines.
Features
various packaging
materials
Soft X-ray inspection can be used to detect biting on aluminum foil, aluminum vapor deposition, and printed opaque film.
can be detectable.
Thin biting such as films and non-woven fabrics can be inspected with high sensitivity.
low price
Since the necessary functions can be narrowed down, the cost can be significantly reduced compared to conventional models.
miniaturization
Retrofitted into existing packaging machines can be possible with no additional space requirement and with minimum modification of the existing machines.
Protection with resin cover is possible.
Typical inspection items
Biting
Number（Quantity）
Misalignment
Products
Device configuration
X-ray sensor system
| specification | |
|---|---|
| Transport belt speed | MAX 40m/min |
| Belt width | MAX 150mm (Varies depending on the product width and height) |
| X-ray out put | 2W |
| Operating environment | Temperature 0～40℃ Humidity 60% or less (No condensation) |
| Inspection item | Detection sensitivity |
|---|---|
| Misalignment | NG judgement when the contents are on the seal area. |
| Biting | Φ2mm or more |
| Stock out | Presence or absence |
| Number | Counting within the range that X-ray can be transmitted |
| X-ray head | |
|---|---|
| Model | WSX010A |
| Outside dimensions | 50 × 30 × 125mm（excluding protrusions) |
| Weight | 400g |
Sensor
SPOT type sensor for various inspections
| Sensor head | |
|---|---|
| Model | WSP-S1A-C0110 |
| Inspection range | 10mm |
| Outside dimensions | 78 × 23 × 10mm |
| Weight | 40g |
| Controller | |
|---|---|
| Model | WSP-C1A-1N |
| Safety | control of X-ray emission by interlock |
| Outside dimensions | 72 × 35 × 25mm (excluding protrusions) |
| Weight | 500g |
LINE type sensor for wide seal width
| Sensor head | ||
|---|---|---|
| Model | WS-S010A | WS-S020A |
| Inspection range | 100mm | 200mm |
| Machine outside dimensions | 150 × 20 × 45mm | 250 × 20 × 45mm（(excluding protrusions） |
| Weight | 200g | 300g |
| Controller | |
|---|---|
| Model | WS-C010A |
| Safety device | Control of X-ray emission by interlock |
| Interface | RS232C 、USB2.0 |
| Outside dimensions | 170 × 60 × 130mm（excluding protrusions） |
| Weight | 500g |
Control unit and display unit
8 inch LCD panel
